Home Page
U.S. Netting

netting products for sport, construction, industry, and aquatic applications
Call Us: 1-800-455-5167 • E-mail: sales@usnetting.com
Hatch Safety Netting 121
confined space safety netting
REDUCE RISK: The Hatch Net system can help you drastically reduce the risk of death or injuries from a fall through in almost any hatch installation. It meets or exceeds all current OSHA and ANSI regulations, affording valuable protection from costly lawsuits, lost time accidents, and OSHA citations and fines. With a safer workplace and fewer accidents, it can also lower worker’s compensation and liability costs.

LOWER COSTS: The Hatch Net design allows for 85% or more of normal day to day procedures to be performed without opening the net. This means one person can safely perform most inspections and routine maintenance without the need for an additional worker or cumbersome fall protection equipment.

NOTE: rails on first dimension
NEW OPENING
HN3060N
30-inch x 60-inch
$725
HN3636N
36-inch x 36-inch
$620
HN4272N
42-inch x 72-inch
$870
HN6048N
60-inch x 48-inch
$940
CONCRETE RETROFIT
HN2460R
24-inch x 60-inch
$770
HN3232R
32-inch x 32-inch
$695
HN54120R
54-inch x 120-inch
$1,475
HN7236R
72-inch x 36-inch
$1,050
Fall-Thru Prevention System (Bay Net)

Reduce Risk • Lower Costs • Increase Productivity

The Bay Net meets or exceeds all current OSHA standards, will greatly reduce the risk of injury or death from fall through in almost any hatch installation. This protects you from costly law suits, time lost through accidents and OSHA fines and citations. It can also lower workers compensation and liability costs.

Because 85% of normal procedures can be accomplished with the Hatch Net in place, one person can safely perform most inspections without the need for an additional worker or cumbersome fall protection equipment.

The Bay Net is a unique, lightweight net system that will greatly reduce the risk of fall through. The system is designed to be installed in any type of floor or roof access hatch, or both new and existing units. The Bay Net does not restrict light or visibility needed for inspections, and the net easily slides open to facilitate access.
FEATURES
  • Manufactured of Aluminum and stainless steel with a highly visible synthetic netting.
  • Stitched with PTFE Sewing Thread. This thread is manufactured from high strength expanded PTFE. It's not affected by UV (ultraviolet) radiation, acid rain, industrial pollutants or cleaning agents.
  • All systems are shipped completely assembled including mounting hardware.
  • Easily installed in virtually any floor or roof opening, new or existing application in minutes.
  • Retracts easily for access to confined space or to pull pumps and equipment.
  • Greatly improves employee safety while allowing freedom of movement and full visibility of area below net for inspections and sampling.
  • Custom sizes are manufactured in days at no additional cost.
  • Full five (5) year warranty on hardware and net.
PRODUCT DESCRIPTION

Basic Use: A rail mounted safety net system designed to be installed in all floor access and roof hatches to reduce risks associated with fall throughs. The safety net system provides protection during the initial opening of this hatch and maintains protection after access has been gained. The safety net easily slides on guide rails to facilitate entry and then repositioned to prevent fall through. This system also provides excellent fall through protection while a hatch or other opening is left uncovered and/or while a worker is below. The Bay Net can be manufactured to fit 150#, 300#, H-20 live load, roof hatches and all other floor openings.
LIMITATIONS

The safety net system after installation should be maintained in the closed position after each use. The Hatch Net is a fall protection system. At no time is the net to be used as a work platform, lifting mechanism, tool holder, tie off point or to attach any other equipment to it.

INSTALLATION

The Bay Net can be installed on any standard aluminum or steel floor access, roof hatch or custom sized framed opening. The Hatch Net 121 Safety System is factory assembled and ready for installation.

AVAILABILITY

Availability: The Bay Net is manufactured to each customer order and shipped within 2 - 4 weeks. Larger orders may take longer.

WARRANTY

The Bay Net is warranteed for a period of five (5) years against defects in material and workmanship. Any modification to the system voids the manufacturer's warranty.

MAINTENANCE

The Bay Net should be inspected semi-annually by Owner. The netting should be inspected for visible decay, fraying, tears or ripped stitches. The hardware should be inspected for damage, broken or bent pieces, corrosion or missing pieces.

CALL 800-455-5167 FOR PRICES AND SIZES

U.S. Netting, Inc. • 1514 Veshecco Drive • Erie, PA 16501 USA • Phone: (814) 455-9400

Toll Free: 1-800-455-5167 • Fax: (814) 455-9336 • E-mail: sales@usnetting.com

RETURN TO HOME PAGE

© 1999-2010 U.S. Netting Inc. All Rights Reserved. Webmaster: Internet Marketing Resources, Inc.